← Ring Size Chart

THE FIT REFERENCE

Ring Size US 5: Diameter and Circumference in MM

In this reference chart, US ring size 5 has an inside circumference of 49.32 mm and a calculated inside diameter of 15.7 mm.

FIND YOUR REFERENCE

Measure inside the ring, excluding the metal band. A finger tape measurement may not match an inside-ring measurement.

US 5

Dimensions from the reference chart

Inside diameter
15.7 mm
Inside circumference
49.32 mm
US
5
UK
J 1/2
EU / France
—
Japan
9

US 5 size meaning and MM dimensions

US 5: 49.32 mm inside circumference, approximately 15.699 mm inside diameter. π × 15.699 ≈ 49.32 mm.

US 5 ring diameter and circumference in CM

Diameter 1.5699 cm; circumference 4.932 cm. Multiplying either by 10 returns 15.699 mm and 49.32 mm respectively.

US 5 ring measurements in inches

Inside diameter: 0.618073 in. Inside circumference: 1.941732 in. These are two different measurements of the same opening.

US 5 European / France reference

France/Russia column: 45 1/4 (45.4 mm) ~ 50 1/4 (50.27 mm). Measured circumference: 49.32 mm. This is the named regional column in the reference, not a single code for all European makers.

US 5 dimensions for india comparison

Compare an inside diameter of 15.699 mm and circumference of 49.32 mm. The available chart entry is US 5, UK J 1/2, Japan 9; a separate local or product-specific code is not present in this table.

US 5 UK / Australia letter size

Letter reference: J 1/2; US 5. The measured opening has 49.32 mm circumference and 15.699 mm inside diameter.

US 5 diameter comparison with KS

ReferenceInside diameter mmInside circumference mm
US 515.69949.32
KS 915.6649.1973

Diameter difference from KS 9: 0.039 mm.

US 5 adjacent-size differences

ReferencemmCircumference gap mm
US 4.547.971.35
US 5.550.270.95

US 5: all ring size systems and dimensions

USUKEU / FranceJapanNearest KSInside diameterInside circumference
US 5J 1/2Not listedJP 9KS 915.699044 mm49.32 mm

US 5: sizes within two size numbers

ReferenceUKEU / FranceJapanKSInside diameterInside circumferenceDiameter differenceCircumference difference
US 3F44JP 4KS 414.050198 mm44.14 mm-1.648845 mm-5.18 mm
US 3.5G45 1/4JP 5KS 514.451269 mm45.4 mm-1.247775 mm-3.92 mm
US 3.625G 1/2Not listedJP 6KS 614.559494 mm45.74 mm-1.139549 mm-3.58 mm
US 4H 1/2Not listedJP 7KS 714.858705 mm46.68 mm-0.840338 mm-2.64 mm
US 4.5I 1/2Not listedJP 8KS 815.269325 mm47.97 mm-0.429718 mm-1.35 mm
US 5J 1/2Not listedJP 9KS 915.699044 mm49.32 mm0 mm0 mm
US 5.5K 1/250 1/4JP 10KS 1016.001438 mm50.27 mm+0.302394 mm+0.95 mm
US 5.75L50 7/8JP 11KS 1116.329297 mm51.3 mm+0.630254 mm+1.98 mm
US 6M51 1/2JP 12KS 1216.510734 mm51.87 mm+0.81169 mm+2.55 mm
US 6.5M 1/252 3/4JP 13KS 1316.921354 mm53.16 mm+1.22231 mm+3.84 mm
US 7O54JP 14KS 1417.284227 mm54.3 mm+1.585183 mm+4.98 mm

US 5: diameter and circumference in three units

Measurementmmcmin
Inside diameter15.699044 mm1.569904 cm0.61807258 in
Inside circumference49.32 mm4.932 cm1.94173228 in

US 5: nearby KS gauges by inside diameter

KSGauge diameterCalculated circumferenceDiameter minus inputCircumference minus input
KS 715 mm47.12389 mm-0.699044 mm-2.19611 mm
KS 815.33 mm48.160615 mm-0.369044 mm-1.159385 mm
KS 915.66 mm49.197341 mm-0.039044 mm-0.122659 mm
KS 1016 mm50.265482 mm+0.300956 mm+0.945482 mm
KS 1116.33 mm51.302208 mm+0.630956 mm+1.982208 mm

US 5: measured diameter offsets

Diameter offsetMeasured diameterCalculated circumferenceCircumference offset
-0.5 mm15.199044 mm47.749204 mm-1.570796 mm
-0.25 mm15.449044 mm48.534602 mm-0.785398 mm
-0.1 mm15.599044 mm49.005841 mm-0.314159 mm
-0.05 mm15.649044 mm49.16292 mm-0.15708 mm
0 mm15.699044 mm49.32 mm0 mm
+0.05 mm15.749044 mm49.47708 mm+0.15708 mm
+0.1 mm15.799044 mm49.634159 mm+0.314159 mm
+0.25 mm15.949044 mm50.105398 mm+0.785398 mm
+0.5 mm16.199044 mm50.890796 mm+1.570796 mm

For US 5, a 0.1 mm increase across the opening adds 0.314159 mm around it: 15.799044 mm diameter gives 49.634159 mm circumference. These measured offsets carry no assigned size code.

US 5: diameter rounding and circumference changes

Diameter precisionRounded diameterDiameter differenceCircumference from rounded diameterCircumference difference
0 decimal places16 mm+0.300956 mm50.265482 mm+0.945482 mm
1 decimal places15.7 mm+0.000956 mm49.323005 mm+0.003005 mm
2 decimal places15.70 mm+0.000956 mm49.323005 mm+0.003005 mm
3 decimal places15.699 mm-0.000044 mm49.319863 mm-0.000137 mm
4 decimal places15.6990 mm-0.000044 mm49.319863 mm-0.000137 mm
6 decimal places15.699044 mm+0 mm49.320001 mm+0.000001 mm

Full chart, measuring method and sources